For ses-imagotag Vusion, take advantage of our extensive selection of mounting rails, holders, and shelf edge profiles. The profiles below, as well as additional models, are available from us in any quantity you require. Use the ses-imagotag Vusion dovetail adapter in conjunction with our wide range of mounting accessories to mount ses-imagotag Vusion ESL in another location in your store.
Close Filter
Apply filter

How to mount Hanshow ESL

So you decided to use electronic price labels of the Hanshow brand in your store(s). The upcoming question will be how to mount them to existing shelving. Extruded rails and shelf edge profiles are the solution. The profiles that used to hold paper price labels are now available to hold Hanshow ESL as well. Each profile is equipped with a special backer part that can either be clipped onto the shelf or glued with adhesive tape. The Hanshow label can now be clipped to the front of the extrusion. Cut-outs at the bottom of the profile make sure that the ESL is mounted firmly in the Hanshow rail and that the labels keep their position when displayed underneath the products you sell.
Above shown Hanshow profiles and rails are usually kept in stock and can be cut to lengths according to your needs. The ESL holders can be made in any length up to 3 meters and even small quantities can be realised. For larger numbers it will make sense to produce the profiles to length directly which will eliminate additional storage and cutting fees. In case you choose a profile with adhesive tape; foam tape is usually applied to the Hanshow extrusion as it is strong enough to hold the weight of the rail + the ESL.

Hanshow rails are usually manufactured in transparent. Should you required the profiles to have a special colour we are also able to produce ESL holders according to RAL colours. A minimum order quantity will apply which has to be determined before ordering.

Customisation of Hanshow Rails

You need a Hanshow rail that is not shown above? No problem, we can customise profiles for Hanshow ESL from our huge assortment of standard shelf edge strips. We can combine a backing part of these holders with an Universal Hanshow rail with adhesive. This is a good solution if the quantity needed is not that high.

On the other hand it might make sense to look at a new extrusion mould for larger projects. We are happy to develop a tool for a new Hanshow profile. With our long term expertise we will be able to design the correct rail for your needs. 
ESL Profile for Hanshow for coffee
Once designed we would supply you with a prototype that you can use to make first tests. When approved by you our in-house tool shop will proceed finishing the new Hanshow mould and production will extrude it according to your project numbers. You have a project to talk about? Do not hesitate and get in touch.
Pegboard adapter for Hanshow ESL

Pegboard Adapter for Hanshow ESL

Each retail store is equipped with many shelving units to present the merchandise to its customers. Mostly these gondola shelves have a pegboard back wall which comes in handy if you want to display blister packages with Euro hole on pegboard hooks. You simply remove the shelf units and install hooks that usually come with a holder for price labels.

When using paper inserts you can use our swinging price tag DRA but we also came up with a solution for Hanshow ESL. The pegboard adapter for Hanshow labels is simply hooked over the T-shaped bracket of the pegwall hook. The viewing angle can be adjusted in several steps depending on whether the hook is installed in eye height or in a much lower position.

Displaying Hanshow ESL in other Store Areas

All in all displaying Hanshow ESL at gondola shelving is quite easy. You either choose Hanshow rails for the shelf edge or the pegboard holder for the use with metal hooks. But what about other areas that do not use typical shelving? How do you display Hanshow labels on poster rails or in the fruit & vegetable section? And what about the deli section with either hot food or fresh seafood on ice?
We have different kinds of solutions for these questions. On the one hand we can provide you with custom made fixings made of shatterproof PET-G. We design tabletop, wall or hanging signage according to the Hanshow label size you have in use. We can either plan the PET-G display so that you simply slide in the ESL or with a click mechanism. First we cut out the desired sheet and afterwards bend the material to the final shape.

Just give us an idea what you plan to accomplish and we will come up with the right solution to mount your Hanshow ESL with the help of PET-G signs.
PET-G tabletop display with ESL
On the other hand we offer you a solution with our Hanshow dovetail adapter that can be used in conjunction with a variety of stands, clips and holders. The Hanshow ESL can easily be clicked onto the dovetail adapter and can now be used freestanding with a base in deli sections, on products or counters, with different kinds of clamps on fruit & vegetable crates, tubing or panels, on metal surfaces with the help of a magnetic clips, in ice or soft materials with our variety of spears, hanging from wire baskets or cable and last but not least on glass panels, wooden boards and further shelving units. We have holders for almost every application in retail stores.

Female Part

Hanshow Dovetail Adapter


Male Part

of Hanshow Adapter System

With our many attachments for the dovetail adapter you can mount and display Hanshow ESL throughout your store. Installation of the adapter system is easy with a female part on the back of the dovetail adapter and male parts on all display attachments and holders. In case you do not find a suitable mounting option for your Hanshow label or if you are not sure which one to use please get in touch with our team. We will be happy to assist you. 
Close menu
Back to top